1:2 GNSS Active Splitter N (f) 58535A

GPS Active Splitter Part # 58535A

Provides Dependable Signals

4:1/2:1 Active Splitters allow multiple GPS receivers to share a single antenna. Designed for both manufacturing and position/timing redundancy applications, the 58536A GPS L1 Active Splitter provides dependable signals for up to four GPS receivers. For large manufacturing facilities, the Microsemi 4 port Active Splitter 58536A can provide as many GPS-L1 (1575.42 MHz) signals as your manufacturing floor requires. With built-in amplification to overcome splitter losses, the Active Splitter can be conveniently cascaded without adding separate amplifiers and bias-tees between splitters.

• Microsemi’s Active Splitters allow multiple GPS receivers to share a single antenna. Designed for both manufacturing and position/timing redundancy applications, GPS L1 Active Splitters provide dependable signals for multiple GPS receivers.For large manufacturing facilities, Microsemi’s Active Splitters can provide as many GPS-L1 (1575.42 MHz) signals as your manufacturing floor requires. With built-in amplification to overcome splitter losses, the Active Splitters can be conveniently cascaded without adding separate amplifiers and bias-tees between splitters.

  High Isolation Eliminates Receiver Interactions Microsemi GPS Active Splitters have the essential port-to-port isolation required to eliminate interaction between multiple GPS receivers. Without such isolation, local oscillator (LO) leakage from one GPS receiver can prevent other receivers from acquiring time and position signals and maintaining lock. In wireless base station applications, poor isolation can disable cell sites. In GPS manufacturing tests, poor isolation causes repeatability problems which can reduce yields and cause false rework.Convenient DC Power Simplifies Your Installation
  Power is conveniently obtained from the GPS receiver(s) connected to the amplifier. This eliminates the need for a separate dc power supply and wiring. DC power applied to the splitter is also passed on for use by an active antenna, further simplifying your installation.